Hello,
I got a new CMOS (Omegon vtec571 = ToupTek ATR3CMOS26000KMA). The INDI Touptek (2.1) driver crashed immediately. I have generated a logfile. What can I do?
Thomas
Hi. Just curious. Did you aver solve this?
JTOL, the only other issue I had with the veTEC was when changing to a newer sdk.
With the latest 55 series, ours looks like this. Some older (known to work) ones we also kept, just in case.
lrwxrwxrwx 1 root root 21 abr 2 15:23 libomegonprocam.so -> libomegonprocam.so.55
-rw-r--r-- 1 root root 21542824 oct 17 2023 libomegonprocam.so.54.22587
-rw-r--r-- 1 root root 21714968 oct 20 2023 libomegonprocam.so.54.23585
lrwxrwxrwx 1 root root 27 abr 2 15:23 libomegonprocam.so.55 -> libomegonprocam.so.55.24621
-rw-r--r-- 1 root root 22312920 abr 2 15:23 libomegonprocam.so.55.24621
No, we have not solved it yet. The camera is on a remote site. This doubles this troubles. Our next try is to replace the USB cables, which were fine for our previously used ASI183-
Thomas
Hello,
I still cannot make a relation between my INDI Touptek Driver 2.1 and your numbers. But I see at lunchpad that some drivers may be old. Because there was no feedback which leads to a solution, we decided to drive 2 hours to our remote site and get back the computer. I made a fresh install to linuxmint 21.3 (was 20.x), installed INDI new from ppa and now the camera works.
Thomas