I have Ubuntu 20.04 on ARM64 board with INDI-FULL/KSTARS.
EKOS connects successfully to my ZWO ASI MC071 pro camera.
I have set values for both GPSStartLine/GPSEndLine to zero as suggested by this post:
indilib.org/forum/ekos/14152-my-asi1600m...stopped-working.html
When I initiate an exposure nothing happens and after some seconds INDI control panel message says retrying a new capture.
The log file shows:
- "ZWO CCD ASI071MC Pro ist verbunden."
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Mount iOptron GEM28 "
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Rotator Rotator Simulator "
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Focuser Focuser Simulator "
- ZWO CCD ASI071MC Pro : "[DEBUG] No filter wheel is set. Clearing All filter wheel watchers. "
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Mount iOptron GEM28 "
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Rotator Rotator Simulator "
- ZWO CCD ASI071MC Pro : "[DEBUG] Snopping on Focuser Focuser Simulator "
- ZWO CCD ASI071MC Pro : "[DEBUG] No filter wheel is set. Clearing All filter wheel watchers. "
- ZWO CCD ASI071MC Pro : "[DEBUG] Configuration successfully saved for SCOPE_INFO. "
- ZWO CCD ASI071MC Pro : "[DEBUG] Configuration successfully saved for SCOPE_INFO. "
- Preparing capture job "" for execution.
- "Capturing 0,010-second image..."
- ZWO CCD ASI071MC Pro : "[DEBUG] StartExposure->setexp : 0.010s "
- ZWO CCD ASI071MC Pro : "[DEBUG] ASIGetExpStatus failed. Restarting exposure... "
- ZWO CCD ASI071MC Pro : "[DEBUG] StartExposure->setexp : 0.010s "
- ZWO CCD ASI071MC Pro : "[DEBUG] ASIGetExpStatus failed. Restarting exposure... "
- ZWO CCD ASI071MC Pro : "[DEBUG] StartExposure->setexp : 0.010s "
- ZWO CCD ASI071MC Pro : "[ERROR] Exposure failed after 3 attempts. "
- "Capture failed. Check INDI Control Panel for details."
I tried the camera with another capture application and can confirm that the camera works flawlessly...
I checked all ZWO xml-configuration files in the .indi directory and all files show GPSStartLine/GPSEndLine = 0, also
in the INDI control panel I have GPSStart/EndLines=0 in the camera's control tab.
I have attached the indi-log-file for more information.
Has anybody ideas what to do to get the camera capture process to work?
Any hint is appreciated,
Thanks
Helmut