Hi all,
I updated from Ekos 3.6.3 to 3.6.6 which meant upgrading to Indi 2.0.0 which in turn updated the zwo drivers and reset the profiles on my camera.
I cannot confirm with 100% confidence whether the USB bandwidth setting I was using before the update was the default 40 or 80.
Am I correct in assuming that there should be no correlation between that setting and dark calibration accuracy, so I don't have to reshoot my dark library?
This is an ASI1600MM-PRO
I can't think why that setting would affect the imaging data but if you are concerned then you could shoot darks for 1 exposure period and produce a master dark in your usual way. Then compare the new master dark with your "old" set. You could use fitsviewer in Ekos which will give you basic metrics like mean / median / max / min values. Or, of course, use some post processing software.
If the old and new are the same then you're done; if not then it'll be time to redo the dark library.