does indi support the integrated iGuider in the CEM70G? The camera isn't recognised as such.
I found the other similar Topic indilib.org/forum/mounts/8031-iguider-su...-cem70g.html?start=0 but the suggestions there didn't help me.
I tested the mount with windows desktop pc and everything worked. The iGuider worked only after the installation of the ASCOM drivers.
Also the USB hubs don't work. Only the iPolar works and the mount slewing.
I did just yesterday an apt update and upgrade, so the system is up to date.
The iPolar and the iGuider seem to be different
It's this specific CEM70G. It doesn't have the USB3 connection in the RA axis.
Sadly, iGuider is not currently supported.
Jasem was experimenting with it recently and said that it might never be supported.
As far as I understand, iOptron never released an INDI driver for it.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
however i tried to be smart today and swapped the cameras and made some discoveries:
* only the connection for the iPolar works
** but only if both connections have cameras connected to them
* both cameras work without any problems on the iPolar connection
-> conclusion: it has nothing to do with the cameras but with the silly USB3 hub iOptron has put into the mount
I can't believe that iOptron has created their own very custom microchip for this usbhub.
Pretty sure they used an off the shelf system. There must be somewhere drivers for it.
Or i rewire the mount and put the iPolar connection into the saddle
EDIT:
Some additional observations:
* RPi usb 2.0 connection to mount: Thumbdrives and webcams are working in the saddle
* RPi usb 3.0 connection to mount: nothing is working in the saddle
* Desktop Linux usb 3.0 connection to mount: Thumbdrives and webcams are working in the saddle (same as RPi usb 2.0 connection to mount)
* My Tracer CCD webcam is working on RPi usb 2.0 and RPi usb 3.0 connection