I just ran into a strange situation: I changed my setup to only having a single ZWO camera and the mount - to do some experiments. But now suddenly I can not capture with Ekos - Ekos crashes when I try. This seems related to the fact that there are no frame dimensions in Ekos. However, they are identified in the Indi Control window. And I can capture with Indi control window. And if I hit "reload configuration" in Ekos, Ekos crashes.
See here:
What's happening here? Oh, and I just upgraded Stellarmate to see if that helped. Did not. And I deleted the ZWO CCD config file and rebooted. Same thing again.
Unfortunately, no stack trace. In this setup I had only one camera - definitely the right one in the Primary train, but again, I'll test more later today. And there is no filter wheel in this configuration - just the mount and one camera.
If the same problem occurs, it might be helpful to create a new profile. I experienced a similar problem a while ago which I could not track down. But a new profile resolved it.
Yes, well, this was a new profile But I'll follow your advice and try again later today.
I just was baffled by Ekos not getting any frame info when it so clearly was there in the Indi window..
Then, later at night, I changed back to my much more complex configuration with 2 imaging cameras and one guiding camera and a filter wheel. NOW the ASI 183 worked flawlessly.....