Hi,
I'm still endeavouring to get everything up and running on my RPI4 using Astroberry Server.
I've set up 2 profiles in the Indi Manager, one for my Zwo 1600MM and one for when I use my DSLR.
Yesterday I had a good day and I was able to get the Mount (EQ Mod), Pegasus DFMC focuser, Altair GP cam Guider and my DSLR all working and I was able to align my mount, plate solve and image.
Today, I decided to try getting my Zwo 1600MM working with my Starlight Express filter wheel. I removed the DSLR and replaced this with the Zwo 1600MM and filter wheel. The Zwo 1600MM is connected to my powered USB 3.0 hub via a USB 3.0 cable and the filter wheel is connected to the Zwo 1600MM via a USB 2.0 cable. Having connected everything up I turned the equipment on and then I turned on my RPI which is connected directly to my router via an ethernet cable . The PI booted up, I entered indi manager and loaded the profile for my Zwo Camera and filter wheel. Having done this I connected to the server and loaded KStars. Having loaded KStars I opened up Ekos and checked the correct profile was listed and then I hit connect. The system appeared to boot up then I got a message stating <strong>'No ASI Camera Detected Power On'</strong>. I also saw that <strong>My mount and Pegasus focuser had not connected</strong>, they appeared to have failed to connect to Ports. I accept that I may have had problems with my camera and filter wheel but my focuser and mount were working yesterday and I've not changed anything apart from adding the camera and filter wheel.
There is obviously power to the camera as the filter wheel is attached to it via the USB cable and this is working correctly and the filter wheel does the self check when powered up.
I've checked everything as best I can with my limited knowledge and I've even had the camera and filter wheel off my scope to test it and everything worked correctly including the USB 3.0 cable. I managed to take a number of dark files as I'm building up my library.
<strong>Can anyone help me sort this out</strong>, the camera does not appear to be recognised and the mount and focuser don't appear to be able to find Ports.
I've attached some images to assist as best I can.
Image showing the Indi Manager and the drivers selected.
Image showing the profile editor with drivers selected etc
Image showing the pop up stating no Asi Camera Detected, No Power
Image showing the Indi Control Panel and the warning messages for my focuser.
Image showing the Indi Control Panel and the warning messages for my mount.
Image showing that Ekos is trying to connect equipment.
I<strong>'m not sure how to produce logs to show what is happening with EKOS etc when I try to connect. If someone tells me how to create the logs and if these will help then I will do it.</strong>
Please help me get this sorted as I've been at it all day and I've got nowhere.
Thanks
Doug