Hi,
After spending hours to figure out what was going on, I figured out there was a contact failure in the EQDirect cable. So it was a coincidence that it worked only on Unbutu Laptop.
Anyway, now it works well on Raspberry.
Read More...
Hi,
I'm playing around with Indi, it looks great but I got into troubles in connecting the mount with EQMod.
$ lsusb
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
$ dmesg
[ 1300.522959] usb 1-1.2: Product: USB <-> Serial
[ 1300.522978] usb 1-1.2: Manufacturer: FTDI
[ 1300.544566] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 1300.544923] usb 1-1.2: Detected FT232BM
[ 1300.547406] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
2022-07-29T18:17:53 EQMod Mount failed to connect.
Please ensure the device is connected and powered on.
2022-07-29T18:17:51 Connecting INDI devices...
2022-07-29T17:27:24: Client 0: read <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Client 5: queuing <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Client 5: sending <newSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:24: Driver indi_eqmod_telescope: sending <newSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:26: Driver indi_eqmod_telescope: read <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 0: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 5: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 0: sending <setSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:26: Client 5: sending <setSwitchVector device="EQMod Mount" name="CONNEC
Hi,
I'm playing around with Indi, it looks great but I got into troubles in connecting the mount with EQMod.
$ lsusb
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
$ dmesg
[ 1300.522959] usb 1-1.2: Product: USB <-> Serial
[ 1300.522978] usb 1-1.2: Manufacturer: FTDI
[ 1300.544566] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 1300.544923] usb 1-1.2: Detected FT232BM
[ 1300.547406] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
2022-07-29T18:17:53 EQMod Mount failed to connect.
Please ensure the device is connected and powered on.
2022-07-29T18:17:51 Connecting INDI devices...
2022-07-29T17:27:24: Client 0: read <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Client 5: queuing <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:24: Client 5: sending <newSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:24: Driver indi_eqmod_telescope: sending <newSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:26: Driver indi_eqmod_telescope: read <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 0: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 5: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2022-07-29T17:27:26: Client 0: sending <setSwitchVector device="EQMod Mount" name="CONNEC
2022-07-29T17:27:26: Client 5: sending <setSwitchVector device="EQMod Mount" name="CONNEC