Hi All,
I have now successfully integrated my Fuji X-T2 into INDI using the gphoto2-based driver. Exposures work successfully with Native Raw and JPEG, there are still some issues with FITS w/r to debayering. However I have found a strange behavior when I set Upload to "Local": After the image is successfully written to the local storage the driver continuous to show "downloading" for about 15 seconds before the next capture is started and the GUI is unresponsive in that period (Spinning wheel on MacOS). This becomes a problem e.g. in the polar alignment routine, because it severely affects the refresh-rate. I have created a debug logfile when that happens:
All steps above take less than 2 seconds (for a 1sec test exposure) until the "Upload complete" is written and the file appears on the local storage. The delay of about 15secs happens afterwards but nothing more is written to the log, so I have no idea what the driver is doing in that period. Furthermore it seems that after the capture, the Upload mode was automatically switched to "Client" in the INDI control panel. So this might have something to do with the problem.
I have replicated the issue on MacOs as well as on Astroberry/Debian, both with latest kstars 3.5.0 and libgphoto 2.5.26 and both with INDI Client and Server on the same machine (so actually "Local" and "Client" should not make any difference at all).
Does anyone have an idea whats going on here and how I can further debug this?