Hello everyone,
First of all thanks to the entire community for the rich amount of posts that helped me solve most of my Ekos/Kstars/INDI related issues so far. But I am now in a situation where searching around the forum didn't lead to satisfactory results.
My current situation is that I own an old EQ-5 mount that I motorized and that I can guide through a ASI120 MM mini and ST4. The motors are capable of slewing at 0.5x, 2x, 16x the sideral speed so it's definitely not enough for complete GoTo capabilities but I currently rely on the (ableit crappy) setting circles, the command pad (at 16x) and the plate solving module in Ekos for my framing sequence.
Usually, my sequence is:
Hello everyone,
First of all thanks to the entire community for the rich amount of posts that helped me solve most of my Ekos/Kstars/INDI related issues so far. But I am now in a situation where searching around the forum didn't lead to satisfactory results.
My current situation is that I own an old EQ-5 mount that I motorized and that I can guide through a ASI120 MM mini and ST4. The motors are capable of slewing at 0.5x, 2x, 16x the sideral speed so it's definitely not enough for complete GoTo capabilities but I currently rely on the (ableit crappy) setting circles, the command pad (at 16x) and the plate solving module in Ekos for my framing sequence.
Usually, my sequence is: