Hi All,
I have a Sesto Senso 2 that I can't connect with Ekos on Raspberry PI 4. I'm using Astroberry and my devices are the below:
- Mount: AZ-EQ6 Pro
- Scope Camera: Canon 700D
- Guide Camera: QHY 5II Mono
- Focuser: Sesto Senso 2
The issue seems to be the USB already used by another device or process,
SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATT [attachment=9158]USB Warning.png[/attachment]RS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", ATTRS{serial}=="insert_your_serial_here", MODE="0666", SYMLINK+="sestosenso2"
Hi All,
A little update about this issue.
The problem is definitely gpsd that occupies dev/ttyUSB0 on the startup. I used the information on this
post
to modify the initial launch of the process. I opened /etc/default/gpsd and I just changed the USBAUTO option to "false", full script below:
# Start the gpsd daemon automatically at boot time
START_DAEMON="true"
# Use USB hotplugging to add new USB devices automatically to the daemon
USBAUTO="false"
# Devices gpsd should collect to at boot time.
# They need to be read/writeable, either by user gpsd or the group dialout.
DEVICES=""
# Other options you want to pass to gpsd
GPSD_OPTIONS="-n"
Hi All,
I think I found the a solution.
Last night I was finally be able to check what process was using /dev/ttyUSB0 and I found out that it was gpsd. So I stopped and disabled it and Sesto Senso 2 connected to Ekos without any problem. I haven't test it yet but I'll give it a try tonight and fingers crossed everything will work. I'll let you know the result.
Cheers.
Read More...
Hi All,
I have a Sesto Senso 2 that I'm trying to control from Ekos installed on a Raspberry PI 4. I'm using Astroberry and my equipment is the below:
- Mount: AZ-EQ6 Pro
- Primary Scope Camera: Canon 700D
- Guide Camera: QHY 5 II Mono
- Focuser: Sesto Senso 2
Everything rather than the focuser works perfectly. The Sesto Senso 2 can't connect because of an USB issue. It seems that the USB is already used by another devise or process, I attached a picture of the 'Warning Message" and Ekos "Connection Tab".
I already created a new rules in /lib/udev/rules.d with the below:
SUBSYSTEM=="tty", SUBSYSTEMS=="usb", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", ATTRS{serial}=="insert_your_serial_here", MODE="0666", SYMLINK+="sestosenso2"