wvreeven wrote: Thanks. It sounds like you'll need a custom INDI driver to be able to use your mount with Ekos. As I said before, it is not possible to use the ST4 port directly from the PI so you will need to find a way to make the Arduino respond to guide command coming from the PI.
Perhaps it would be a good idea to start a new thread for this since we are deviating from the original Astroberry post now quite a lot.
wvreeven wrote: It is possible to guide by sending guide pulses directly to the mount. In that case both the camera and the mount need to be connected to the PI. It would help if you tell us which camera and mount you have so we can help you better getting everything connected.
Wouter
wvreeven wrote: The ST4 connector is meant to connect the guide camera to the mount so it can forward guide pulses to the mount. It requires the guide camera to be connected to the PI using an USB cable.
HTH, Wouter
Wow Astroberry looks amazing.
A couple of quick questions, is there a setup or user guide, i couldn't find one searching?
Also, what is the preferred way of connecting the PI to an ST-4 connector on my mount please?
Sorry if this is the wrong place to post these questions.
Read More...