HI all,
I am using an astroberry and recently upgraded everything on my system using apt-get upgrade to reach the latest version of Ekos/Indi. Unfortunately now however I am encountering an issue every time I try to connect cameras to my setup. I have a ZWO CCD and an Orion auto guider. Every time I try to connect them the indi driver crashes, and the description at the bottom says that it failed to locate the cameras. The indi driver also crashes with the cameras disconnected, so it seems like the driver is failing even before an attempt at connection is made. Is this a known issue?
I attach the log file in verbose mode for INDI under the various tabs.
Thank you all very much and all the best!HI all,
I am using an astroberry and recently upgraded everything on my system using apt-get upgrade to reach the latest version of Ekos/Indi. Unfortunately now however I am encountering an issue every time I try to connect cameras to my setup. I have a ZWO CCD and an Orion auto guider. Every time I try to connect them the indi driver crashes, and the description at the bottom says that it failed to locate the cameras. The indi driver also crashes with the cameras disconnected, but only if I tried connecting them before. Restarting Ekos with the cameras unplugged does not result in a crash.
I attach the log file in verbose mode for INDI.
Thank you all very much and all the best!
Apologies to all for the long delay, today was the first chance I had to test the issue again.
Thank you very much! I assume this requires the image files to be downloaded and do not come with the default installation? (when I enabled it in the settings no new images were shown)
Read More...
Hi all,
Sorry if this is a simple question but I'm very much a beginner.
I'm trying to get some of the most prominent nebulae/galaxies to display images in the KStars planetarium. I see every time I right click an object the option to "Download DSS image", but unfortunately my setup computer only has rare access to internet (it's an astroberry). As a result, I was wondering if there was a way to batch download many images of the most prominent deep sky objects?
I have tried installing catalogues (all of the optional ones in the setup wizard) but so far as I can tell these only show position/magnitude etc and don't come with an image attached.
Is there anything I'm missing?
Thanks!
Read More...
Cheers for the suggestion. Will try this when the clouds clear!
Read More...
Hi all,
I'm encountering a problem when I do a meridian flip with my telescope. After the meridian flip the location of the CCD FOV is not centred in the same location. This happens even after alignment when plate solving says the error is < 30".
It seems to me that the point to which plate solving syncs the telescope is not actually the centre of the CCD FOV. Thus when the image is rotated during a meridian flip the two FOVs don't overlap.
Do you have a guide scope? If yes what's the focal length? If you switch between primary and guide scopes in alignment, does this change the FOV value?
Dear knro,
The focal length is 430mm, aperture of 73mm.
The camera is an ASI 294MC Pro with a pixel size of 4.63μm
All these values appear correctly in the settings.
I tried with multiple binning settings and all produced the same result, I've currently set it to 4x4.
I enabled logging and the logs show the correct FOV when the image is solved, but the FOV reported in the plate solving tab of Ekos and the Kstars CCD overlay are both giving a value (1/4 * 1/4 of that size).
Thanks for the quick reply!
Read More...
I have managed to successfully setup plate solving to work using the astrometry.net offline solver (on Mac OS).
The solved images have the correct position, but the FOV shown is exactly (1/4 x 1/4) of the correct value.
If I set the search size to automatically adjust in the settings, it always fails to solve the second image, as values far too small are automatically inputted!
If I use the online solver within Ekos it also gives the wrong FOV, but the website version of astrometry reports the correct value.
I have checked that the focal length and aperture are set correctly in Ekos, although I don’t see how this could make a difference, as surely the FOV is exclusively determined by the image itself.
Is there anything I’m missing/doing wrong?
Thanks!
Read More...
I'm having serious issues trying to get the CCD simulator to show any stars. When I take a picture it only shows noise and displays no stars. I did some digging around and another post suggested that I hadn't installed the GSC.
So I opened the install wizard and indeed I hadn't installed it! So I went ahead and downloaded the files (through the setup wizard) and KStars says that the program is now installed.
However I still get no stars showing up on the FITS Viewer. Any ideas what could the problem could be? Thank you very much!
(I am running Mac OS 10.14.5.)
Read More...
I'm having serious issues trying to get the CCD simulator to show any stars. When I take a picture it only shows noise and displays no stars. I did some digging around and another post suggested that I hadn't installed the GSC. (
indilib.org/forum/general/3169-osx-issue-with-gsc.html
)
So I opened the install wizard and indeed I hadn't installed it! So I went ahead and downloaded the files (through the setup wizard) and KStars says that the program is now installed.
However I still get no stars showing up on the FITS Viewer. Any ideas what could the problem could be? Thank you very much!
(I am running Mac OS 10.14.5.)
Read More...