Hi,
I have just received my shiny new CEM25p and wanted to connect to it via indi. I have been using indi for months to connect to my guide camera. It is indi v1.4.1 built from sources.
I connect an USB-rs232 converter to a laptop and connect it to the serial port of the mount. On the Linux machine I have a Win7 virtual machine, where - if the USB device is passed through - the mount works via ASCOM confirming that both the converter and the mount is OK.
I am trying to use the indi_lx200zeq25 driver - though tried other ones with no success. Both from phd2 and from "cartes de ciel" I can see the server offering the zeq25 but I cannot connect. With phd2 connection to the mount fails - probably timeout, in CDC just nothing happens. It seems to me that the driver is not communicating with the mount at all.
I switched on debug logging in the INDi control panel and this is what I can see in the debug log:
phd@mercury:~/.indi/logs/2017-06-21/indi_lx200zeq25> cat indi_lx200zeq25_09:17:46.log
INFO 35.123878 sec : Session log file /home/phd/.indi/logs/2017-06-21/indi_lx200zeq25/indi_lx200zeq25_09:17:46.log
INFO 109.535003 sec : Session log file /home/phd/.indi/logs/2017-06-21/indi_lx200zeq25/indi_lx200zeq25_09:17:46.log
INFO 111.081999 sec : Session log file /home/phd/.indi/logs/2017-06-21/indi_lx200zeq25/indi_lx200zeq25_09:17:46.log
INFO 121.965507 sec : Session log file /home/phd/.indi/logs/2017-06-21/indi_lx200zeq25/indi_lx200zeq25_09:17:46.log
I also tried to start the server with -vvv switch but there seems to be not much information regarding the communication between the mount and the driver. I'm attaching the log output.