I'm pretty new to this community and just starting with Kstars (VM under Windows, all devices connected to a Raspberry). So far I enjoy the whole setup alot. I am also using the indi_v4l2_ccd driver on the Raspberry Pi cam which seems to be fine so far as all control elements show up properly BUT: The cam/driver does not seem to react properly to changes in the parameters i.e. when I increase the exposure time it sticks with the default no matter what I enter. When enter the exact sensor data of the Pi cam and hit save, it does not store these permanently and shows the defaults on the next program start. Lastly when I increase the resolution of the pic to be captured to anything larger than the default (1024x768) then it hangs forever. Anyone any ideaas on this?