Hi Robert,
The new driver is now integrate with the main github repository
github.com/indilib/indi
github.com/indilib/indi/pull/387
Please give us feedback when you test it.
Nacho
Read More...
Hi Robert,
This weekend I spent some time developing the new driver (base on GotoNova driver as you suggest it). You can find it on my indilib git fork:
github.com/nachoplus/indi
Please, compile and test if possible.
I did the job working with the real hardware. This is the list of things than work right now:
.- Slew and slew end. Slew end without :SE# cmd, it is calculate as: abs(currentRA-targetRA)< 5 arcsec && abs(currentDEC-targetDEC)< 5 arcsec
.- Change the track mode (Sideral, Solar, Lunar ...) It only works if the mount is not stopped and at this moment you need to make a initial slew (only one time)
.- Get/set site (Lat/lon) and Time( UTC, UTCoffset)
.- Guiding ( :Ms#/;Mn# )... and pulse guiding (:Ms xxxx#...). In my mount works..
.- Change guidding speed (0.25x, 0.5x or 1.0x)
.- Abort motion
.- Sync the mount
Thinks than don't work:
.- Start/Stop tracking (you have to star from the HC and then you can change the rate by indi but can not start/stop at present time)
.- Custom tracking rates (:RR/RD xxx ). Is in the GUI but not work.
Is a on going work but any testing are wellcome. I'll continue next weekend...
Regards
Nacho
Read More...
Hi Silver
>>> Comands Me# and Mw# dosen't works corect. There is bug in the firmware. Ioptron will never fix it. I think about workaround. Maxim Dl uses small goto for move by arrows.
I ma not aware of that. I did not implement. I'll try this weekend when I'll have time to mount my ieq45.. Are you ask ioptron people for that?
>>>Could You check commands :SE?# and :SE# ?. My mount does not respond to them.
Same that above but is not in the HC8406 command set, so I'll expect to not work. In the old driver I checked the end of slew comparing actual RA/DEC with target RA/DEC.
Now I am studied the code to figure out what is the best way:
a) recover the old driver (the easy one for me)
b) do a new one base on lx200zeq45 (mostly works for HC8604...)
c) do a new one base on ieqpro driver. (?)
May be @krno could help us to decide...
Nacho
Read More...
As starting point I forked indi repository and make the changes needed to compile the old indi_ieq45_8406 driver again. It works. No guiding commands at this moment and more testing is needed but at least I can connect, change track speed, read RA/DEC and slew ...
github.com/nachoplus/indi
Something is wrong when using with PHD2 as auxiliary mount. May be phd2 miss some properties .. I'll do futher investigations...
Nacho
Read More...
Hi Silver,
I am Nacho Mas, the developer of the old ieq45 8406 and 8407 INDI drivers (in obsolete dir). I have been disconnected of the INDI proyect last years but I own a ieq45 (HC8406) and I need to command again it using INDI.
I think indibase changed so much this years that is easier to create a new driver as you are trying than compile de old one.. May we can work together ... I have not much time but at lease I can help you testing and fixing base on my previous experience...
I paste here some outstanding documents and information that I rescued from my mailing with ioptron people. This information is dated on 2013..