I'm running Astroberry and have 2 Ekos profiles, one for the APO and one for the Newton. Both telescopes have an ASI EAF focus motor but with different max positions due to the different focusers. I tried to set up 2 different device labels for the EAF driver and use the corresponding label in the profile so that the parameters (i. e. max position) is saved for both EAFs independently.
I added 2 labels in /usr/share/indi/indi_asi.xml:
and selected the appropriate device in the profile editor:
I also created 2 *_config.xml files for the new device entries in ~/.indi :
.
But when I start Ekos/Indi, the name of the device in the Indi control center tab is always "ASI EAF" and not "ASI APO" (for instance, or "ASI Newton":
If I change the max position (or any other parameter) and then save the configuration, always the file ~/.indi/ASI EAF_config.xml is updated and never the ASI EAF APO_config.xml or ASI EAF Newton_config.xml.
Am I missing something? I know of other guys who use the same procedure and for them it works...
Just a short update: One guy with a working 2-profile 2-identical-focusers setup uses a Pegasus DMFC, so no ZWO ASI EAF. I talked to another one with 2 ZWO ASI EAFs in 2 profiles and he has the same problem, only 1 parameter set possible.
thank you for your reply. I tested the Custom Drivers tool as well and it didn't work either. You tested with the ASI EFW filter wheel, my problem is with the ASI EAF focus motor. Is it possible that it depends on what driver you try to create an alias from?
Anyway, I'm just finishing adapting a Russian TAIR-3-PhS 300mm F/4.5 lens to the purpose of astrophotography and I realised that INDI/Ekos force me to change settings obtained with some effort. The lens will be equipped with ZWO EAF, like another refractor, which is my main scope now.