Hi guys in these first attempt to use qhy294m with astroberry, sometimes ekos crashed and automatically close all windows!! This is a huge problem that bring me away a lot of time. Also sometimes happen that the camera connection fall down and i must restart driver or disconnect and riconnect the camera.
Please can anyone help me?
Thanks a lot and sorry for my horrible english i'm italian
Please advise more information about your setup, software versions, and then, try to run KStars through the debugger and check all options before you start to get full debug information.
Of course! My equipment is: QHY294mm pro( QHYCFW3), Asi120mm mini,astroberry focuser, indi eqmod.Here in attached i put the last logs file of kstar. Looking at the file i can't see anything that reporting a crash, but only some captuer aborted, but i'm sure that during this interval ekos and kstar crashed.
I would suggest enabling ALL debugging options on both Kstars and INDI tabs, as well as the INDI capture driver. you do that by disable auto-connect on your profile, then start the profile, and before you press connect, go to the camera tab, and look for the debug options, select all, and make sure you write to a file, then connect your profile.
You will have 2 files to use, the kstars log and INDI driver log
Hi, i've enabled all debug i think, i've created a profile with only QHY driver and i've tested it doing a bias. After 2/3 frame the connection with the camera fall down, even though this time ekos isn't crashed.
Rendering Error in layout Message/Item: array_keys(): Argument #1 ($array) must be of type array, null given. Please enable debug mode for more information.
Thanks for the advice oui, but yesterday i've tried to use CCDciel instead of kstar, but the problem still be present. If i try to do a sequence of bias after some frames the software lost the connection with the camera. This suggest me that the issue is in the indi drive of the camera maybe.