hi!
so i tried to figure out what is going on, and I programmed a little bit on my own controller; so basically, KStars seems to process my coordinate output not properly. when is start up my program, i get these requests from KSTars with the LX200 Basic driver over the serial port:
and i answer them properly (at least CdC and Stellarium can process my responses). KStars does not track the telescope, but it reacts to Sync and Slew commands in the LX200 Basic protocol. here is the log. what am i doing wrong?????
yours
wolfi
2016-12-26T19:48:02.712 - DEBG - INDI Server: "2016-12-26T18:48:02: startup: /usr/bin/indiserver -v -p 7624 -m 100 -f /tmp/indififo55b26855 "
2016-12-26T19:48:02.712 - DEBG - INDI Server: "2016-12-26T18:48:02: listening to port 7624 on fd 3"
2016-12-26T19:48:02.712 - DEBG - INDI Server: "FIFO: start indi_lx200basic -n \"LX200 Basic\""
2016-12-26T19:48:02.713 - DEBG - INDI Server: "With name: LX200 Basic"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "FIFO: Starting driver indi_lx200basic"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: pid=2575 rfd=4 wfd=7 efd=8"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Client 5: new arrival from 127.0.0.1:46980 - welcome!"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: Initializing from LX200 Basic device..."
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: snooping on GPS Simulator.GEOGRAPHIC_COORD"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: snooping on GPS Simulator.TIME_UTC"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: snooping on Dome Simulator.DOME_PARK"
2016-12-26T19:48:02.713 - DEBG - INDI Server: "2016-12-26T18:48:02: Driver indi_lx200basic: snooping on Dome Simulator.DOME_SHUTTER"
2016-12-26T19:48:02.713 - DEBG - INDI Server: ""
2016-12-26T19:48:02.734 - DEBG - INDIListener: Processing device LX200 Basic
2016-12-26T19:48:02.755 - DEBG - < LX200 Basic >: < CONNECTION >
2016-12-26T19:48:02.764 - DEBG - < LX200 Basic >: < DRIVER_INFO >
2016-12-26T19:48:02.794 - DEBG - < LX200 Basic >: < DEBUG >
2016-12-26T19:48:02.807 - DEBG - < LX200 Basic >: < SIMULATION >
2016-12-26T19:48:02.810 - DEBG - < LX200 Basic >: < CONFIG_PROCESS >
2016-12-26T19:48:02.811 - DEBG - < LX200 Basic >: < DEVICE_PORT >
2016-12-26T19:48:02.812 - DEBG - < LX200 Basic >: < TELESCOPE_BAUD_RATE >
2016-12-26T19:48:02.812 - DEBG - < LX200 Basic >: < ACTIVE_DEVICES >
2016-12-26T19:48:02.813 - DEBG - < LX200 Basic >: < DOME_POLICY >
2016-12-26T19:48:06.653 - DEBG - LX200 Basic : "Debug is enabled. "
2016-12-26T19:48:06.654 - DEBG - < LX200 Basic >: < DEBUG_LEVEL >
2016-12-26T19:48:06.659 - DEBG - < LX200 Basic >: < LOGGING_LEVEL >
2016-12-26T19:48:06.729 - DEBG - < LX200 Basic >: < LOG_OUTPUT >
2016-12-26T19:48:12.112 - DEBG - LX200 Basic : "Toggle Debug Level -- Scope Verbose "
2016-12-26T19:48:27.167 - DEBG - LX200 Basic : "CMD <#:GR#> "
2016-12-26T19:48:27.231 - DEBG - LX200 Basic : "RES <18:37:08> "
2016-12-26T19:48:27.233 - DEBG - LX200 Basic : "VAL [18.6189] "
2016-12-26T19:48:27.235 - DEBG - LX200 Basic : "LX200 Basic is online. Retrieving basic data... "
2016-12-26T19:48:27.258 - DEBG - < LX200 Basic >: < ON_COORD_SET >
2016-12-26T19:48:27.280 - DEBG - < LX200 Basic >: < EQUATORIAL_EOD_COORD >
2016-12-26T19:48:27.291 - DEBG - < LX200 Basic >: < TELESCOPE_ABORT_MOTION >
2016-12-26T19:48:27.304 - DEBG - < LX200 Basic >: < TELESCOPE_MOTION_NS >
2016-12-26T19:48:27.314 - DEBG - < LX200 Basic >: < TELESCOPE_MOTION_WE >
2016-12-26T19:48:27.316 - DEBG - < LX200 Basic >: < TELESCOPE_INFO >
2016-12-26T19:48:27.323 - DEBG - < LX200 Basic >: < TARGET_EOD_COORD >
2016-12-26T19:48:27.324 - DEBG - < LX200 Basic >: < USEJOYSTICK >
2016-12-26T19:48:27.325 - DEBG - < LX200 Basic >: < Slew Accuracy >
2016-12-26T19:48:27.329 - DEBG - LX200 Basic : "CMD <:GR#> "
2016-12-26T19:48:27.330 - DEBG - LX200 Basic : "RES <18:37:08> "
2016-12-26T19:48:27.331 - DEBG - LX200 Basic : "CMD <#:GR#> "
2016-12-26T19:48:27.430 - DEBG - LX200 Basic : "RES <18:37:08> "
2016-12-26T19:48:27.431 - DEBG - LX200 Basic : "VAL [18.6189] "
2016-12-26T19:48:27.433 - DEBG - LX200 Basic : "CMD <#:GD#> "
2016-12-26T19:48:27.531 - DEBG - LX200 Basic : "RES <+38?45:01> "
2016-12-26T19:48:27.532 - DEBG - LX200 Basic : "VAL [38.7503] "
2016-12-26T19:49:20.196 - DEBG - ISD:Telescope: Sending coords RA 18.6251 DEC 38.8024
2016-12-26T19:49:20.203 - DEBG - LX200 Basic : "<setObjectRA> "
2016-12-26T19:49:20.236 - DEBG - LX200 Basic : "CMD <:Sr 18:37:30#> "
2016-12-26T19:49:20.238 - DEBG - LX200 Basic : "CMD <:Sr 18:37:30#> successful. "
2016-12-26T19:49:20.240 - DEBG - LX200 Basic : "<setObjectDEC> "
2016-12-26T19:49:20.241 - DEBG - LX200 Basic : "CMD <:Sd +38:48:09#> "
2016-12-26T19:49:20.324 - DEBG - LX200 Basic : "CMD <:Sd +38:48:09#> successful. "
2016-12-26T19:49:20.325 - DEBG - LX200 Basic : "<Sync> "
2016-12-26T19:49:20.327 - DEBG - LX200 Basic : "CMD <:CM#> "
2016-12-26T19:49:30.359 - DEBG - ISD:Telescope: Sending coords RA 18.9929 DEC 32.7167