Lacking experienced with the tools; my goal is to produce drivers for some Arduino devices. The first project is a DC motor focuser. I know that there are templates for INDI Arduino drivers but first I must learn how to use the tools.
QtCreator 5.7.0 and related Qt tools are installed. Including Qt5Network. (But not Cmoc and Ctest) on Ubuntu MATE 16.04
Reference:
www.indilib.org/develop/developer-manual...ent-environment.html
So I have ~/Projects/indi directory structure
I also have ~/Projects/training where qt-tutorial-01 is stored. This tutorial gives a very basic grasp of how the Qt tool can be used.
I have read the INDI White Paper so that also teaches a lot.
After several hours of exploration and tests, some questions arise.
Is it possible to have KStars-Ekos using the indiserver etc. on the /Projects/indi/libindi-build path rather than the /usr/bin ? My attempts failed (using the webserver localhost:8264) when I disabled the /usr/bin/indiserver in favour of the /Projects/indi/libindi-build and rebooting….)
If this problem can be solved, then the next issue can be the availability of a “test driver” to add to the list to test in Ekos. I would start with the indi driver tutorial examples. How are these builds to be included in the list categories for device drivers? (Probably via the development environment configuration …..?)