Hi Howard, Yes I misstyped and updated, driver version is 1.22 in Indi.
I have also included logs now in post above
2024-02-16T18:46:13: [ERROR] Check system & Align if doing align to see if it went through!
2024-02-16T18:46:13: [ERROR] Unexpected return on sync call!
My uneducated guess it is indi/ekos, as I need to restart Stellarmate, while onstep continues to work. And Astroberry works fine with 10.20a if I remember correctly.
I really can't tell where the problem is but OnStepX had changes to the sync commands ahead of 10.20a so who knows.
More detailed command logging... even enabling logging in OnStepX (on a different serial interface than this is talking across) might shed some light on it.
I see weaknesses in the Sync :CM# command return and added code to the master to "harden" it against that. Not sure there is a problem but it's not impossible.
Something has changed, or I changed something, now sync works on first or second solve, then it breaks, i need to disconnect and then reconnect, to be able to sync.
From sky safari no issues at all, so I would think it is on ekos side
Would you happen to know how to successfully flash the English sws to my terranns industries board ? I’ve tried just about everything with no success … here is the version I’m using of onstep.. I can’t read Chinese .. thx in advance !
Most probably better to post your question to the
OnStep Group
As a first advice you should make sure you are skilled in electronics
Read carefully the Onstep Wiki and make sure you understand the multiple jumper functions in the terrans board.
I cannot help since I don't have this hardware and also because Terrans is not willing to cooperate in any manner after I contacted them some month ago.