Hope you are doing well.
I have two systems using INDI functionalities. I have an issue with one of the two systems. The issue is related to a QHY 5-II camera.
First setup
LINUX64 (ubuntu 18.04) architecture.
INDI last version lightly
INDI_QHY_CCD version 2.7
SDK 21.1.19 version
Second setup
AARCH64 (ubuntu 18.04) architecture
INDI last version lightly
INDI_QHY_CCD version 2.7
SDK 20.12.23 version
Everything is fine with the First setup First setup
QHY_CCD_TEST: success
GETTING A PICTURE FROM EKOS : success
I have a problem with the second setup Second setup
QHY_CCD_TEST: segmentation fault with "GetQHYCCDSingleFrame failure, error: -1"
GETTING A PICTURE FROM EKOS: fail with "GetQHYCCDSingleFrame failure, error: -1"
I fixed the problem.
I managed to upgrade the SDK version in the RPI4.
I did it in a dirty way :
sudo rm -rf /usr/lib/aarch64-linux-gnu/libqhyccd.so*
sudo apt-get remove indi-full indi-qhy libqhy
sudo apt-get install indi-full indi-qhy libqhy
now I have the SDK 21.1.19 version on my RPI4 and all is working fine.
thanks.
The following user(s) said Thank You: Jasem Mutlaq
This has SDK libqhyccd.so.20.2.19 in it, which actually works and is more recent that the version 6 I used as per the previous thread, so I just put this lib there manually temporarily.
Still the question is on: where did you get a 21.1.19 from?
Rendering Error in layout Message/Item: array_keys(): Argument #1 ($array) must be of type array, null given. Please enable debug mode for more information.
I think there is a label issue - the latest release is libqhyccd.so.20.2.11 but should be libqhyccd.so.21.2.11. I installed this from the nightly on Feb 11. Seems to work find for my QHY5L-II mono on RPI and x64.