So...
Firstly I had to review the step to compile and install this driver through the make file.
See firstly the file "qhy_ccd.ccp" that I have modify to validate gain,offset and USB Speed. You will see that the modification is very simple but not portable ( be care if your using QHY8L and 8Pro...). As you will see there one point that I was not able to activate is the binning 2X2 and 4X4... that a little bit frustarting whan I making a atroresolution wit hte 1X1 binning. It take longer timer than if I was able to active the 4X4 binning. That will be the next step.
If you fill confident, you can follow the indication done on "
github.com/indilib/indi-3rdparty" to recompile the QHY CCd driver with the "qhy_ccd.ccp" file I have send to you and install it.. If you do so, of course I will convince you to make a copy of your entire rasberry system due to the risk of installation crash you may.
If you don't fell confident , I propose to you to copy the lib here with "indi_qhy_ccd" and copy it in the /usr/bin directory renaming the existing file with old extention in case it is not working
File Attachment:
File Name:
qhy8.zip
File Size:170 KB
File Attachment:
File Name:
qhy8.zip
File Size:170 KB
. you should do that with the "sudo" prefix comman I supose as you are in the systme files. I am not sure that it will works due to that fact that I have use the "
github.com/indilib/indi-3rdparty" indication to compile and install the new lib. But let try... I think it shoud works.
in any case, let me know if it works !
If it works, on last thing, the command to reintithe usb connection if you interrupt the acquisition before the end of the exposition..:
open a command line and type:
JC