Hi, I have managed to setup Ekos and Kstars, it has detected my Nikon Z6 camera and I can see a video preview, so I know the camera is talking to Raspberry Pi, when I try to take a test image, the shutter fires and then the wheel in Ekos spins, then the software crashes, I suspect it has to do with either the file type or where I'm trying to save it. I have read that on Nikons the images need to saving to the card in the camera ?, so that is what I have tried to setup. I'm not sure if its the setting in Indi or Ekos that is causing the problem. Does anyone have a working Z6 ? if so could they share the correct settings that work for them please.
I have a Nikon Z6 and it works just fine in Ekos on StellarMate. I write raw files to the camera SD card and FITS to my pictures folder in StellarMate. I have the capturetarget setting in the indi driver set to SD instead of RAM. This was a carryover setting from my old Nikon d7000 that required it, but it seems to hold true for my Z6 as well.
SkyWatcher HEQ5 > Pegasus Pocket Powerbox > Celestron Nexstar 6se OTA w/ f/6.3 FR > Nikon Z6 imaging camera > Agena StarGuider 50mm guide scope > ZWO ASI290MM Mini guide camera