I'm using indi to make an allsky camera with a QHY5-II.
It seems the minimum exposure value is only 0,001s (1ms) : Requested exposure value (0.0001) seconds out of bounds [0.001,3600] in ekos
But with 1ms and the minimum gain, I'm always overexposed during the day : white frame.
I found this values on a commercial website : Minimum Exposure 20us / Maximum Exposure 10 minutes
Is it possible top update this values ?
Sébastien.
Linux Mint 19 Cinnamon using PPA for latest KStars-bleeding and INDI
Raspberry Pi 3 B+ with StellarMate
Atik 314E - ASI120M - CG5 with Celestron C9.25
I am using kstars/ekos with a QHY5L-II as an allsky camera and I have the same issue. I would also like to have the minimum exposure time changed to 20 us if possible.
It's much more reliable. I will test it next week with my own QHY5.
The QHY5II for the allsky is on the way for the Chili ^^. I will update indi at the end of october.
Linux Mint 19 Cinnamon using PPA for latest KStars-bleeding and INDI
Raspberry Pi 3 B+ with StellarMate
Atik 314E - ASI120M - CG5 with Celestron C9.25