I cannot connect my cgx, I am added to the dialup group. I found this, but do not know where to put it 'stty -F /dev/ttyUSB0 clocal'
'2018-02-15T01:15:50: [ERROR] Failed to connect to port (/dev/ttyUSB0). Error: Port failure Error: Permission denied. Try adding your user to the dialout group and restart (sudo adduser $USER dialout)
2018-02-15T01:15:50: [WARNING] Communication with /dev/tty/USB0 @ 9600 failed. Starting Auto Search...
2018-02-15T01:15:50: [ERROR] Failed to connect to port (/dev/tty/USB0). Error: Port failure Error: Not a directory. Check if device is connected to this port.
Did anyone ever manage to get the CGX working with INDI? I just ordered one, but have not found a single thread of info on whether or not it will work with INDI. Hoping it supports the same protocol as all the other NexStar hand controlled mounts.
I currently operate a CGX with INDI via a raspberry pi. By design, the CGX is controlled through the USB port on the handset. The only issue that I have encountered is that the mount may be off by 1 hour if "Mount Updates KStars" is not selected on the INDI tab in the KStars configuration. Other than that, I have been using it for a couple of months and slewing, guiding with the internal guider, and plate solving seem to work well.