I recently downloaded and installed Stellarmate to a RB4. Following the video tutorials I attached a Nikon D3200 as my imaging camera and a ZWO ASI 120 as my guide camera.
Everything is detected and connects as expected. However, the D3200 does not capture images on both the Stellarmate app and Ekos on my Mac - the capture (preview) process starts and then returns an 'unspecified error' in the INDI console. I have no such problem with my ZWO.
The D3200 is set to Manual in Bulb mode, I have also removed the SD card to stop the D3200 being identified as an external storage device and connect direct to the Macs USB, all with the same result.
Whilst I suspect that there may be a specific setting on the D3200 I am missing, I have not been able to find the solution. Does anyone have any experience and can help.
Yeah everything works fine on stellarmate please remember to click the "DSLR Setup" button in the Profile screen in the App to put the resolution and pixel pitch for your camera.
I noticed I get the same error if the camera is not ready to capture.. I have a lens on it, so I just rotate it until it can capture an image. Not sure if you have an lenses attached to it or not. Gotta try it without lenses too.
Update: Found the cause of the issue. D3200 does not allow shutter control via USB when in Bulb mode (not an issue with the D3500). I have tested outside of Bulb mode and the process works as expected, albeit tied to the exposure settings on the camera body.
I have found a couple of homebrew solutions which involve hacking together the USB cable with the remote cable. Not ideal.
If anyone has any experience of this and/or an alternate solution please update this topic.