I am currently working on creating an interface between the indi-server and a costum telescope controller. the telescope controller can be interfaced through RS232 andI have written a simple python script to control the telescope from the terminal. However, I have no idea how to make indi-server, kstars, PHD2, etc. with the telescope controller ...
You can do it via Telescope Script driver... i.e. specify the python command for each command. Though writing in C++ is really not that difficult especially since you already have access to ALL the source code for all the drivers to use as a reference.
Thank you for the quick reply. yes , I was looking for something like and indi telescope script driver. However, I can't find any information about it. Could you please provide a link?
Regarding C++, I would really like to write a driver in C++ and I have already looked at existing drivers. However, I have Python ADHS ... which means it will probably take 1000x longer to modify a driver in C++ than just writing it in python ...
There is no official documentation for the telescope script, just run it and put the path to the python script for each command. I guess you can to check the code to find out what format it is using. If you can write the documentation after that then it would be great for all future users!