Hello all,
I have bought a Raspberry Pi 4 three days ago and installed Astroberry on it. I am deeply impressed by how powerful it is. I have had a few glitches that have been all solved with the help of this forum and google.
I am managing now to connect my Fuji XT3 and did a few captures, managed to change settings like aperture, shooting mode, metering , etc. It looks very promising but I have the few issues that might be a show-stopper.
1. When I set the exposure to a value, the
exposure value on the camera differs by 100. For example if I set Exposure to 200, I will get 2". The problem is that the counter waits 200" to take the next picture (!).
There are a lot of places to define Exposure. On the main Capture settings menu but also on the Indi Control Panel under "Main Control", which says Expose Duration (s). Also the same occurs with Presets unsurprisingly.
EDIT: Did find
this thread
with the same issue but no answer. The answer on the link didn't help me
2. I can not manage to find a way to
make the ISO selection drop-down show. I am using the GPhoto CCD profile, and shooting in FITS Format. Next to the FITS dropdown, there is an empty space where I believe ISO should appear.
3.
If i use RAW, I can only achieve pictures using Native Transfer Format when triggering from the "Main Control". As soon as I trigger from the CCD & Filter Wheel menu, it reverts to FITS and I get an error saying "Unsupported Bayer pattern GGGG".
The only work around is shooting JPEG which is far from ideal.
Any help will be greatly appreciated.
Many thanks
