I use a Player One camera(Ceres-C).
However, when I take an image with the camera using EKOS, the image looks strange. Two similar images are lined up side by side.
Is there something wrong with the settings?
Please give me some advice.
My device
camera: Player One Ceres-C
Driver: indi_playerone_ccd ver0.2
Kstars on RPi4
Hi all,I was able to solve the problem. I will report the result.
By changing the Format setting, a normal image could be obtained. The Format setting was "Raw16", but it was changed to "Raw8". Player One Camera(Ceres-C) camera has a depth of 12bit, but seems to set it to RAW8.
The results are attached below.
RAW16
RAW8
The following user(s) said Thank You: Jasem Mutlaq