Hi Everyone,
i'm a new user in indi platform and i trying to use an raspberry pi for astroberry server to control my telescope.
My setup is an EQ5 mount controlled by AstroEq system.
I have a big problem with the kstars/ekos sw in which i can't set the maximum slew rate for go to.
Probably is a old topic but i don't find a solution and unfortunately my stepper motor don't support high speed (maximum 128x). Can you help me?
Thanks all.
Hi,
When you start Ekos a popup is shown with the INDI configuration. In the tab for your mount you can specify the goto or slew speed. Just click through the sub-tabs until you find the option. Don't forget to go to the Options tab for the mount and click Save so the changes get stored.
Hi,
thanks for your support.
I tried to change the value in my mount inside INDI control panel (EqMod Mount -> Motion control -> Custom Speeds) and after that i click on Save in Option tab (in attached).
Unfortunately nothing is change, the motors go at the max speed when i perfom a goto command. I tried also to change from 0,05x to 128x but doesn't work.
I wrong something? i must be change some other field?
In the same tab almost at the top there is a drop down for the slew speed. You need to set that to 800x. Like I wrote, search for goto or slew speed, not custom speed.